RJ, which means Registered Jack and 11/45 is merely the number assigned to the interface standard.
Some may confuse refurbished telecom equipment with used or second-hand ones. However, there is a big difference. Refurbishment is to restore used equipment into a condition of safety and effectiveness comparable to when new, while used or second-hand equipment are simply equipment that has been in service and is put into service again without any processing.
Wednesday, September 23, 2020
Over the year, base station antennas have evolved with the mobile communication technology, e.g. omnidirectional antenna, directional single-polarized antenna, cross-polarized antenna, electric tilt antenna, MIMO (multi-In, multi-out) antenna, active antenna and etc.
Friday, September 11, 2020
According to a research from Cable.co.uk, South Africa ranks 101 out of 206 countries on the broadband internet cost in the world. In addition, Sub-Saharan Africa fared worst overall, with all but six of the 35 countries in the region with the most expensive broadband prices.
If you are unfortunately in these regions, this article could help you escape your local ISP and get internet at a faster speed and probably at a much cheaper price.
Wednesday, August 19, 2020
E-waste, or Electrical and Electronic Equipment (WEEE), is discarded electrical or electronic devices. Here are some facts about E-waste.
Wednesday, August 5, 2020
GBIC and SFP modules are both transceivers which are hot-pluggable, meaning they can be loaded into and out of a working telecommunication switch without the need for powering down. What are their differences?
1. Save your budget
2. Upgrade the network equipment building standards
3. Reliability
4. Better warranty
5. Maintaining compatibility
6. Save on software licenses
7. Cheaper and easier to maintain
8. Hedge against obsolescence
9. Sustainability
10. Testing new technologies
This tutorial covers fiber optics and fiber optic cable, including the definition, type, application and advantages.
We have moved to new location!
Fiber optic cable is an excellent medium for the transmission of data, due to its flexibility, low cost and high performance. However, it is more expensive to install. This is because it needs to be installed and tested by specialists and special test equipment is often required.
Therefore, choosing the right equipment for the job would save you both time and money.